BIQU CryoGrip Pro Frostbite for Bambu-Lab P1S/P1P/P2S/X1C/X1E/X2D/A1 257x257mm Cold Build Plate Room Temperature Print Double Sided Upgrade Plate Removable Surface Platform
BIQU CryoGrip Pro Frostbite for Bambu-Lab P1S/P1P/P2S/X1C/X1E/X2D/A1 257x257mm Cold Build Plate Room Temperature Print Double Sided Upgrade Plate Removable Surface Platform: Amazon.com: Industrial & Scientific
Source: Amazon product listing. Last captured 1d ago — recheck on Amazon.
Amazon can change price, availability, coupons, variants and delivery at any time. The final Amazon checkout offer always controls.
The stored Amazon price is awaiting a fresh verification. Historical price comparisons are withheld until the current offer is fresh and enough real captures exist.
WhattAPrice earns from qualifying purchases. Commission never changes the price you pay.
Price snapshot
Price history and deal breakdown
No accepted historical price captures are available yet. WhattAPrice will show a chart after at least two real captures are recorded.
Historical metrics will appear only after real price captures are recorded.
Historical-price scoring is withheld until at least two accepted real captures exist.
Scores shown here are based on WhattAPrice price and catalog signals. External review sources are presented separately in Review Intelligence.
Specifications, review intelligence, safety and warranty
- • Perfect Compatibility: CryoGrip Pro Frostbite Panda Build Plate is compatible with Bambu-Lab P1S, P1P, P2S, X1C, X1E, X2D, A1 3D printers. An AR code is included on the build plate to ensure it is recognized by the X1C, eliminating setup errors for a hassle-free printing experience. NOTE: If you are using P2S, please close the build plate printing detection
- • Room-Temp Printing: PLA filament can be printed at indoor temperature and provide ultra strong adhesion, with a temperature range of only 30-50℃, saving heating bed time, Eco-Friendly, 50% Power reduction. It can also be used for PETG filament (50-70℃) and ABS filament (100℃), saving heating bed time, hourly power saving 50W/h and clog free
- • Unparalleled Adhesion and Zero Heat Generation: CryoGrip Pro Frostbite Panda Build Plate has unparalleled first layer adhesion. The substrate has high magnetism, strong adsorption and fixation, and limits stress warping, so there is no need to worry about printing failure caused by the first layer falling off, greatly improving the printing success rate. Designed to safely protect your printing at room temperature. Enjoy perfect printing effect without warping
- • Easy to Removable: The printed model can be disassembled without the need for other tools; After bending, the steel plate can return to a flat state. After prolonged use, wiping with clean water can easily restore the new adhesive effect
- • Special Material Texture Printing: CryoGrip Pro frostbite Cold Build Plate sandwiched with 7 layers of cobalt oxide coating, consisting of Base Plate, Base Coat, Intermediate Coating, and Top Coat. The base coat and intermediate coating are respectively a highly active adhesion layer and an ice blue ultra-high temperature light cured sintered layer, bring Impact resistant, Corrosion Resistant, Long life span.zero risk of repeated bending causing coating to peel off
Similar products worth comparing
Compare price, deal quality and WhattAPrice shopping signals before buying.
Creality Official Ender 3 Extruder Upgrade Metal Drive Feeder 3D Printer Parts for Ender-3 Pro/3S/3 V2/3 Max CR-10/10S Gray Aluminum 1.75mm Filament Extruder
Creality 3D Printer Enclosure Fireproof and Dustproof Tent Constant Temperature Protective Cover Room for Creality Ender 3V2/Ender 3V2 Neo/Ender 3S1/Ender 3Pro/Ender 3 3D Printer
